Cover –GOLD SEAL®

GOLD SEAL® cover glass is made from pre-selected, pre-cleaned silicate glass. It is available in various shapes and thicknesses and is packaged with desiccants in a lint free box. Both cover glass cases and slide boxes convert to convenient slide storage files.

Rectangular and Square Cover Slips （Bellco Brand）

• #1 thickness （0.13 to 0.16mm）
• Packed one ounce （28 g） per case
• Clear white borosilicate glass.

Square and Rectangular Cover Glass

* For use with Bellco Leighton Tissue Culture Tubes, see page 145.

Circular Cover Glass

Round Cover Slips （Bellco Brand）

• #1 Thickness （0.13 to 0.16mm）
• Packed 1 oz （28g） per case

Round Cover Slips, German Glass

• For neural cell cultures
• Shown to be more effective with hard to attach cells
• #1 Thickness （0.13 to 0.16mm）
• Packed 1 oz （28g） per case

Round Cover Slips – German Glass

These coverglass which are made from German glass can be used for growing and culturing cells that normally have poor adhesion to plastic or regular glass surfaces. The 5mm size will fit inside the 96 well plates and still have enough room to pick up from the bottom of the well with forceps. The 8 mm size fits inside the 24 well plates. Available with #1.5 （0.16 – 0.19 mm） thickness. Packaged in convenience size: 100 per box

Quartz Microscope Slides and Coverslips

There are many applications that require slides and coverslips that have absolute UV transparency, and high temperature properties. EMS now is introducing the highest quality, clear fused quartz microscope slides and coverslips to meet all of these requirements.

• The window of highest transparency to UV is between 0.15µ to 5µ.
• Typical flatness measured 2 to 4” bands per inch.
• Soften point is about 1250°C （2282°F）.
• Standard microscope slide thickness is 1 mm.
• Standard coverslip thickness is 0.2 mm.

Quartz Microscope Slides

Quartz Coverslips

Superslip® Micro Glasses

Finally, your automated coverslipper has the right coverslip to allow it to run smoothly.

These “Superslip®” coverslips are designed to work in automatic coverslip machines and humid environments without sticking or jamming up in the middle of a run.

These new superslips combine specialized production procedures with our unique moisture-resistant packaging which brings you superior coverslips.

Cover Slips; Thermanox®; TMX Coverslips

NUNC™ Brand Thernanox®, or TMX coverslips are made from a polymer （in the polyolefin family） that is highly resistant to most chemicals. Thermanox® plastic is resistant to alcohols, aldehydes, hydrocarbons, dilute acids （<10%） and dilute alkalis （<2%）. TMX has limited resistance to chlorinated hydro-carbons, however, it is not resistant to concentrated acids or bases.Thermanox® plastic is a flexible, trans-parent polymer that can be sectioned using a microtome and is able to withstand high temp-eratures （temperature range –70ºC to +150ºC）. Thermanox® coverslips are culture treated on one side for enhanced cell attachment and growth. The treated side is packaged face up toward the label.

Features:

• Flat and remain flat
• 0.2mm （No. 2） thickness
• Resistant to commonly used solvents
• Safe and easy to handle
• Auto fluorescent in the range 380 to 545 nm
• Thernanox® cover slips can be autoclaved at 20 minutes steam, 20 minutes dry at 120°C

Technical Tip

Permanox Plastic; Non Fluorescent
Coverslip Treatment Test

Photoetched Cover Slips

These coverslips are made from pure white glass and photo etched on the surface for a permanent gridded pattern.

Square Gridded Coverslips

• Using No. 2 （.17 -.24mm） thickness cover slips.
• Grid contains 520 alphanumeric coded squares, each square 600 x 600µm （0.6mm x0.6mm）.
• Used to facilitate mounting of micromaniputated cells or chromosome spreads.

Circle Gridded Coverslip

• 25mm diameter.
• Using #2 （0.17– 0.25mm） thickness cover slips.
• Unique grid pattern, numbered 1 to 200 squares, each 500µm width.
• Suitable for insertion into most 6-well plates.
• Adaptable to most microscope mounting plates.
• Unique grid pattern, numbered from 1 to 200.
• Facilitates observation of activity growing cells.

Reference: Lin, Lin-Fang and Frank H. Riddle, 1981. Photoengraving of Cover Slips and Slides to Facilitate Mounting of Micromanipulated Cells or Chromosome Spreads, Exp. Res. 134:485-488.

Disposable Rinzl Plastic Micro Slides

• Made from optical clear vinyl with a refractive index of glass.
• Ideal for wet mount, urines, etc.
• Economical, they can be used and discarded.
• Available standard size 3 x 1" and packaged 144 per box.
• Will not break, scratch, or cut fingers.
• Not auto-fluorescent.
• Thickness 0.0180 to 0.022" or 0.46 to 0.56mm.

Rinzl Plastic Coverslips

• Made from clear vinyl plastic.
• Unbreakable, will not scratch or cut fingers.
• Used in Biological and Medical labs, etc.
• Thickness 0.01" or 0.28mm.
• Refractive index of glass.
• Economical and half the price of glass.
• Not autofluorescent.

Plastic Cover Slips

Unbreakable .007" （1.57mm） flexible cellulose acetate, square 22x22mm. Trusal, L., Baker C., & Guzman, A., Stain. Tech., 54,2 pg. 77.

Microscope Slide Storage Boxes, Trays, and Holders